High Quality Polished Chrome Door Handles

Pair of polished chrome door handles, high quality, fully sprung universal lever / lever handle set. Replacing your broken handle set or the replacement of tired door furniture, just gives your front door whether its composite, aluminium, timbre or uPVC  an easy makeover. Ideal for giving your French door a bit of class or spruce up that back door. Very easy to fit only two screws and the only tool required is a pozidrive screwdriver.

 

 

A pair or set means one handle for each side of a single door.

For example, on a double door (French door) you would require two pairs, one handle on the left hand side and the other on the right hand side externally, then the opposite lever of the door handle set where the screws are located, the screws always should be showing on the inside of the doors.

 

Universal means suitable for open in, open out, left & right hung doors. Dimensions are shown in the collection of main photos and info below.

Supplied with colour matched M6 screws if the need is for a shorter length then cutting will be required and this can be accomplished with a junior hacksaw. You may find it more convenient to use your existing screws.

Please do not overtighten or be forceful when turning screws, only use a hand held screwdriver not any type of battery or electric driven screwdriver.

 

92pz is the most common size, this critical dimension is from centre of the handle spindle to the centre of the euro cylinder. This distance will need to measure at 92mm for these handles to fit. This fitting detail cannot be modified in anyway unlike the handle fixing screws mentioned previously.

 

Backplate width:    33mm.

Backplate depth:    12mm.

Backplate length:  246mm.

Polished mirror finish Chrome.

 

Backplate width and length is cosmetic and each manufactures of door furniture varies their own backplate sizes. This is usually to accommodate their particular manufacturing process or production machinery or it could be part of a design brief.

Distance between fixing screw hole centres is 211mm. You may find it necessary to redrill new fixing holes or elongate existing holes as there is no standard for this distance between the fixing screws, the distance of 211mm (may vary by + or - a few mm) is one the most common measurement used for a long backset lever / lever handle of approximately 240mm in length.

 

Chrome is a great finish chrome is hard-wearing and requires little cleaning. Usually you can use a dry cloth to buff and clean chrome handles. However, if the door furniture has accumulated dirt you will need to use soap and warm water, make sure you rinse thoroughly and dry.

 

Please check all measurements and suitability before ordering. 

Exact product colour displayed may vary depending on setup and quality of the device used to view.