High Quality Replacement Door Handles

A Pair of High Quality Fully Sprung Universal Set of Door Handles

A pair means one handle for each side of a single door,

for example on a double door (French door) you would require two pairs, two handles on the outside and two on the inside.

White

Black

Anthracite Grey Ral 7016

Suitable for Open In, Open Out, Left & Right Hung Doors.

Dimensions are shown in the collection of main photos and info below

Supplied with two different lengths of Colour Matched M6 screws 65mm & 85mm,

minimising the need for cutting but if needed can be cut with a junior hacksaw. 

Please do not overtighten or be forceful when turning screws.

You may find it more convenient to use your existing screws.

Supplied with two different length of 8mm spindles, 108mm & 134mm for door thicknesses 44-51mm & 69-75mm

PZ92, most common size, this 92mm critical dimension is from centre of handle spindle to centre of barrel

Backplate width:   30mm

Backplate depth: 12.5mm

Backplate length:  220mm & 240mm

Distance between fixing screw hole centres 122mm or 211mm, you may find it necessary to drill new fixing holes or elongate your existing holes as there is no standard

for the distance between fixings but this is the most common size for a long backset door handle.

Please check all measurements and suitability before ordering.

Exact product colour displayed may vary depending on setup and quality of the device used to view.