High Quality Replacement Door Handles
High Quality Replacement Door Handles
A Pair of High Quality Fully Sprung Universal Set of Door Handles
A pair means one handle for each side of a single door,
for example on a double door (French door) you would require two pairs, two handles on the outside and two on the inside.
White
Black
Anthracite Grey Ral 7016
Suitable for Open In, Open Out, Left & Right Hung Doors.
Dimensions are shown in the collection of main photos and info below
Supplied with two different lengths of Colour Matched M6 screws 65mm & 85mm,
minimising the need for cutting but if needed can be cut with a junior hacksaw.
Please do not overtighten or be forceful when turning screws.
You may find it more convenient to use your existing screws.
Supplied with two different length of 8mm spindles, 108mm & 134mm for door thicknesses 44-51mm & 69-75mm
PZ92, most common size, this 92mm critical dimension is from centre of handle spindle to centre of barrel
Backplate width: 30mm
Backplate depth: 12.5mm
Backplate length: 220mm & 240mm
Distance between fixing screw hole centres 122mm or 211mm, you may find it necessary to drill new fixing holes or elongate your existing holes as there is no standard
for the distance between fixings but this is the most common size for a long backset door handle.
Please check all measurements and suitability before ordering.
Exact product colour displayed may vary depending on setup and quality of the device used to view.