Build Block Online Ltd
Coloured Weather Door Drip Bar
Coloured Weather Door Drip Bar
Regular price
£3.95 GBP
Regular price
Sale price
£3.95 GBP
Unit price
per
Tax included.
Couldn't load pickup availability
Very easy to fit uPVC weather door rain deflector drip bar complete with fixings and colour matched end caps.
Will never rot unlike wooden weather bars especially considering the nature of the application
These are high quality weather bars that will not fade or change colour in sunlight
Free Postage & Packing
We aim to despatch same day
Price includes VAT at 20%
Made from virgin lead free UV stable strong uPVC
Made in England by Deceuninck
End caps & screws are supplied with each weather bar.
Only sample 100mm bars are without screws or end caps.
We can cut lengths to suite please purchase the next size up and leave the size required in notes when ordering.
Any Item over 900mm in length cannot be despatched to the below destinations free of charge,
Channel Islands
Isle of Man
Isle of Wight
Northern Ireland
Scilly Isles
Scottish Highlands
Scottish Islands
also including postcodes AB31-38 & AB40-56.
A carriage charge will be advised and cancelation will be an option before despatch.
Please note - Marks may be evident due to this being a factory product but will wipe off or if required, a mild abrasive can be used.
Will fit most doors and windows
Used on all types of uPVC, composite, aluminium, wooden doors & windows
Used on Tilt & Turn windows also may be used on the head of any casement window
Keeps the bulk of water away from the bottom of a door
Size of bar 23mm high x 18mm wide (Projection) and length of your choice
Can be fitted in a few minutes, very simple to fit can be cut to length with a junior hack saw or ask us to cut it for you when ordering, this is a free of charge service.
Measuring & Fitting Instructions
Draw a horizontal straight line on the outside face that the weather bar is to be fitted to. Equally mark out the 2 - 4 dependant on length chosen fixing screw positions along the line. Either drill a 3mm hole through the first skin of the door / window, alternatively with a battery screwdriver with a cross head tip you can drive the self drilling screws in. Slide the drip bar over the heads of the nipple head screws and set the drip bar centrally in position. For best results the bar should finish approx. 5-10mm from each end of the door frame when closed and the bottom of the drip bar should be about 15mm above the highest part of the bottom of the threshold that the door seals to when closed. This allows for any expansion or movement you may experience over seasons. The end caps can be held in place with silicone or superglue
Please check all measurements and suitability before ordering.
Exact product colour displayed may vary depending on setup and quality of the device used to view.
